Драйвера для Proview
 

Подскажите ,где взять драйвера для монитора ProView под Виндовс ХР.В поисковиках не могу найти,ссылки дохлые.Изображение на мониторе темное.98 винд имел эти драйвера,а ХР нет.

Сходи сюда: _http://www.proview.net/service/download

Там увидишь это (ссылки на дрова работают):

Driver Download
Drivers for windows 95/98/2000/ME/XP

Please download the Proviewpnp3.exe and Driver Instructions to install the driver for all Proview Monitor and LCD.

After download and install, your INF& ICM files will be store at location C:\PROVIEW

DDC INSTALLATION PROCEDURE

If your display adapter and driver support DDC monitors the monitor will be automatically detected and installed as a "VESA DDC compatible monitor" by Windows 95/98/2000/ME at startup.

Specify the path to the INF file locate at C:\PROVIEW and press the <ENTER> key:
The "Select Device" dialog box will appear. Select the monitor that corresponds to the one you connected to your machine and click OK.
Windows 95/98/2000/ME will copy the INF file to the proper directories on your system.
Continue choosing Close until you close the Display Properties dialog box.
Reboot your Computer.


MANUAL MONITOR INSTALLATION PROCEDURE

Click Start, then Settings, then Control Panel.
Start the "Display" applet program.
Select the "Settings" page, push the "Advanced" button.
Push the "Change" button in the "Monitor Type" area.
Push the "Have Disk" button and press "OK".
Specify the path to the INF file locate at C:\PROVIEW and press the <ENTER> key:
The "Select Device" dialog box will appear. Select the monitor that corresponds to the one you connected to your machine and click OK.
Windows 95/98/Me will copy the INF file to the proper directories on your system.
Continue choosing Close until you close the Display Properties dialog box.
Reboot your Computer.