|
ed246
Fatal
Как посылаете?
Можно еще обнулить NVRAM.
1 Turn the printer off.
2 Press and hold down the GO button.
3 Turn the printer on and continue to hold the GO button for at least
20 seconds. During this process, the GO button, Attention, and
Ready LEDs will each turn on.
4 Release the GO button.
5 The printer LEDs will begin cycling. The NVRAM-unit process will
run until the printer is in the ready state.
При этом принт вернется к заводским установкам.
* all menu settings to factory default values
* factory settings such as formatter number, page counts, factory
paper settings
|