что написано на сайте...
Цитата:
Here are some possible booting scenarios you may encounter:
• If you know which device you want to boot from, and you know that it
contains a bootable operating system, follow the directions in
“Accessing the Boot Console Interface” earlier in this chapter, and
then type the following at the prompt:
Main Menu: Enter command > boot device
where device is the hardware path to the device, specified in
Mnemonic Style Notation. For example, if you wish to boot an
operating system that is stored on a DDS-format tape drive that is
located at the hardware path scsi.1.0, you would type the following
command at the prompt and press Enter:
Main Menu: Enter command > boot scsi.1.0
|
И то, на что они ссылаются заранее...
Цитата:
Accessing the Boot Console Interface
If the system unit has crashed or power was turned off for some reason,
press the power switch and proceed to step 3. Otherwise, to access the
boot console interface, follow these steps:
NOTE This procedure should be done by a system administrator or superuser
with root log in permission.
1. Close any files and applications on your computer.
2. Press the power switch on the front panel of the system unit.
NOTE There is no need to log in as root and execute the shutdown -q
command to shut down the HP-UX operating system on your computer
before powering it off. When you turn off the power switch, your
computer automatically shuts down the operating system before
terminating the power.
Make sure you do not unplug the system’s power cord or otherwise
interrupt power to the system unit at this time.
When the operating system has been properly shut down, the
following message will appear:
Shutdown complete
3. Power on your computer after your system has completely shut down.
If auto boot is turned off, the boot sequence automatically stops at
the boot console Main Menu.
If auto boot is turned on, you will see the following message:
Processor is starting auto boot process. To
discontinue, press any key within 10 seconds.
Chapter 6 173
The Boot Console Interface
Accessing the Boot Console Interface
If auto boot and auto search are both turned on, you will see the
following message:
Processor is booting from first available device.
To discontinue, press any key within 10
seconds.
NOTE If you are using a power-saving monitor, you will have less than 10
seconds from the time this message appears to press a key.
4. Press a key. You will then see the message:
Boot terminated
The Main Menu of the boot console appears.
|
Действительно, нельзя XP поставить... Может, тогда DYuriyю имеет смысл какой-нибудь эмулятор для win поставить, если он не может без xp жить?
18.08.2006, 08:39
